Automatic Single and Multiple Wire Cutting Stripping Machine

Automatic Single and Multiple Wire Cutting Stripping Machine | MT-K10, MT-K10T

Automatic Single and Multiple Wire Cutting Stripping Machine MT-K10, MT-K10T; Stripping length from both sides only, total cutting length and quantity etc. must be entered; then the machine automatically performs the cutting and stripping operations.

Description

Automatic Single and Multiple Wire Cutting Stripping Machine MT-K10, MT-K10T; stripping only two sides long, cutting and short etc. must be entered; then the machine will cut and strip automatically.

TECHNICAL PARAMETERS

Model No.	MT-K10T (V BLADE)	MT-K10 (U BLADE)
Wire Range	1mm²- 10mm² (AWG17 – AWG7)	1mm²- 10mm² (AWG17 – AWG7) 2×0.5mm² – 3x1mm² Max cable OD 7mm
Cutting Length	0-99999mm	0-99999mm
Stripping Length	Front 1-30mm End 1-30mm	Front 1-150mm End 1-80mm
Pipe Diameters	4mm, 6mm, 8mm, 10mm	4mm, 6mm, 8mm, 10mm
Stripping Mode	4-wheel	4-wheel
Wire Materials	PVC	PVC
Cut	High Speed Cutting	High Speed Cutting
Speed Setting	1-9	1-9
Power	AC220/50Hz AC110/60Hz 300W	AC220/50Hz AC110/60Hz 300W
Tolerance	±0.2%*lenght	±0.2%* lenght
Machine Weight	32kg	34kg

BLADE SETTING AND KNIFE BACK SETTING SETTING FOR SOME CABLE TYPES

These values are approximate and may vary depending on the cable brand.

Wire Types	Blade Setting	Blade Back Setitng
0,75 mm² NYAF	70	10
1,00 mm² NYAF	80	10
1,50 mm² NYAF	85	10
2×0,50 mm² TTR	130	10
3×0,50 mm² TTR	145	10
3×0,75 mm² TTR	155	5